PERGAM's Strategic Partners – World-famous Manufacturers

PERGAM supplies up-to-date diagnostic equipment, industrial equipment and machines, produced by leading world manufacturers, to Russia and the CIS countries.
Basing on characteristics, development trends and forecasts for the most attractive market segments and using long-established ties with major industrial enterprises, PERGAM successfully represents interests of a number of foreign companies in Russia and the CIS countries.

Logo	Description	Catalog	Site
			go
	FLIR Systems Inc, (NASDAQ: FLIR) is a leading manufacturer of innovative imaging systems that include infrared cameras, aerial broadcast cameras and machine vision systems. Our products play pivotal roles in a wide range of industrial, commercial and government activities in more than 60 countries. Pioneers in the commercial infrared camera industry, the company has been supplying thermography and night vision equipment to science, industry, law enforcement and the military for over 50 years. From predictive maintenance, condition monitoring, non-destructive testing, R&D, medical science, temperature measurement and thermal testing to law enforcement, surveillance, security and manufacturing process control, FLIR offers the widest selection of infrared cameras for beginners to pros.		go
	Olympus Corporation is an international company operating in industrial, medical and consumer markets, specializing in optics, electronics and precision engineering. Our goal is to supply reliable, economical inspection and maintenance systems globally that enhance safety, security, and productivity for customers and that contribute to society. We are committed to actively pursuing the development of new technologies, products, and services that offer the best solutions to customers' needs. Our commitment to designing quality products is directly linked to our customers' responsibility to comply with the highest industry standards and regulations in order to ensure public safety.		go
	Zetec is the World-leader in providing nondestructive (NDE) inspection solutions based on integrated multi-method technologies — eddy current, ultrasonic, remote field and magnetic flux leakage. The company offers the complete NDE solution including a line of turn-key systems, instrumentation, software products, supplies, calibration, repair, training and inspection services, all offered world-wide. In addition, our customers bring Zetec hundreds of new nondestructive testing challenges. Zetec focuses on these customer applications to provide complete solutions as well as leadership for innovation and best practices in NDE inspections. Zetec has an accomplished team of industry and technical experts — application engineers, probe designers, machinists, and assemblers — to meet those challenges.		go
	Guided Ultrasonics Ltd. (GUL) is the world leader in the development and manufacture of guided wave inspection equipment and training. GUL’s Wavemaker Pipe Screening System sets the standard for guided wave testing and is now specifically named in many end-user guided wave inspection procedures. GUL does not provide an inspection service; however, we are frequently on site supporting and training users of our equipment, who are based on six continents. GUL tightly regulates its training scheme, which is required for all users of GUL equipment. GUL is an SME (Small to Medium Enterprise) that focuses on research and development. We concentrate on developing the premier guided wave equipment and providing excellent training and customer support for it.		go
	Parker Research was the originator of the flexible-leg magnetic inspection yoke and has been manufacturing portable Magnetic Particle Inspection Equipment and accessories for over thirty years. Their products are used throughout the world for nearly every conceivable magnetic inspection application, including military, aerospace and industrial applications. Find out how one of the Parker Contour Probes can save time and money in your shop or field magnetic inspection application.		go
	Created in 1993, ICM provides portable industrial X-Ray generators to various fields of the Radiographic Testing industry (RT) and is now worldwide recognized as a major actor in the world of Non Destructive Testing (NDT). Its famous Site-X 300kV panoramic tube head, integrated on a crawler, is the world leader for intra-tube pipeline welding inspection. Always focused on the future, ICM annually invests 10% of its turnover in Research and Development. In this view, the ICM R&D team lately developed the CPB series, a range of constant potential, battery powered X-Ray generators, especially dedicated to digital (DR) and computed radiography (CR).		go
	"C-TEC Systemtechnik und Serviceleistung für die Werkstoffprüfung GmbH" situated in Luenen is the product of many years of experience and co-operation between science and industry. The increase in the market for material testing offers many opportunities for potential developments in systems engineering as well as in the area of services. Reliable, economic engineering and individual problem solving for customers make us leaders in our field.		go
	Silverwing UK Ltd began to trade in January 1983, under the name Silverwing Limited, as a service inspection company specialising in Non Destructive Testing (NDT), Contract Management, Training and Consultancy. Initially the company specialised in aircraft NDT, Tube Inspection for the Nuclear and Petrochemical industries and training and consultancy in those industries.		go
	PRÜFTECHNIK, a maintenance technology company, pioneered laser shaft alignment and offers products and services in alignment, condition monitoring and non-destructive testing. With subsidiaries and distributors in more than 70 countries the company serves manufacturing enterprises around the world. PRÜFTECHNIK is a group of companies headquartered in Ismaning, near Munich, Germany, with approximately 400 employees worldwide. Our core business areas are high-tech measuring systems for industrial maintenance and quality assurance. PRÜFTECHNIK is the global leader in shaft alignment systems. Our award-winning alignment products have become standard equipment in many sectors of industry. Innovative machine monitoring systems for all machine types and sizes serve our customers to optimize system availability and enable a high level of productivity. Inspection systems for the nondestructive testing of semi-finished products are integrated in the production process to assure high product quality.		go
	A global multi-technology company making your next construction project safer, quicker and more cost effective. Founded in 1970, Radiodetection has grown over the years into a successful international company. With its headquarters in Bristol, UK, worldwide sales, service and support are achieved through a network of sales channels right around the globe. Radiodetection, part of United Dominion Industries acquires Telespec Ltd, Guildford, Surrey, UK. Telespec manufacture CCTV systems for pipe and ductile inspection. UDI acquires Pearpoint Ltd, Bordon, Hants, UK. Pearpoint design, manufacture and sell CCTV inspection cameras for use in a variety of applications from sewers to traffic monitoring.Radiodetection acquire Mactek, the Riser Bond distributor for Australia.		go
	Utilities worldwide rely on Radiodetection Cable Avoidance Tools (C.A.Ts) to prevent accidental damage to underground services when excavating. Trenchless products enable pipe-laying companies to direct the drill and so speed installation of utilities. Radiodetection's cable test products quickly locate problems such as breaks or deteriorating insulation. Down-hole inspection products from Radiodetection use the latest digital CCTV in difficult environments to enable water companies to perform regular inspection and maintenance, troubleshooting and repairing sewer and other pipes. A range of dehydrator products is available as a fixed installation in telephone exchanges maintaining cable health. Every product in the Radiodetection range is designed and manufactured to the highest standards. Radiodetection is ISO 9001 accredited and holds a variety of approvals from customers.		go
	MALÅ Geoscience is the global leader in the design and manufacture of Ground Penetrating Radar (GPR) systems. We provide high quality, reliable and easy to use equipment to solve your subsurface investigation needs. With over 70-years of professional experience, we understand the needs of our customers and have developed a versatile range of products that offer solutions across a broad range of applications. From non-destructive testing (NDT), concrete imaging, utility detection and mapping to geophysical investigations, including Borehole, MALÅ Geoscience has a GPR solution for you.		go
	Bicotest cable installation, commissioning, proof testing and maintenance instruments for twisted pair telephone cables, coaxial communications cables, local loop networks, digital line testing and power distribution cables.. Popular products and services from Bicotest: Cable Installation		go
	Primayer instruments utilise innovative technologies for use in water networks. They form an integrated approach to system monitoring and leakage control. The company has modern design facilities situated in the heart of Hampshire, United Kingdom. Additional sales and support facilities are located in Kuala Lumpur, Malaysia, and Lyon, France.		go
	BAUR’s testing and measurement technology prevents damage to networks and systems, allows for accurate planning of investments for maintenance, and locates faults as precisely and quickly as possible. For the reliability of your networks and systems.		go
	Programma Electric AB, grundadat 1976, är en välrenomerad leverantör av provutrustning och analysmetoder för reläskydd, högspänningsbrytare, stationära batterisystem och portabel högströmsutrustning. Många av Programmas produkter har etablerat industristandard för robust och portablel provutrustning. Instrumenten används vid idrifttagning och underhåll i ställverk för högspänning. Företaget är beläget i Täby		go
	For over 100 years, Megger has been the premier provider of electric test equipment and measuring instruments for electrical power applications. The trademark was first registered in May 1903 and is jealously guarded by the company. Although we're best known for our world famous range of insulation testers, Megger provides a full service solution to meet your electrical test and measurement needs. Our products provide testing solutions in the most critical maintenance areas including cable fault locating, protective relay testing, and power quality testing. With such a diverse product offering, we are the single source for electrical test and measuring instruments.		go
	GE Energy is one of the world's leading suppliers of power generation and energy delivery technologies in all areas of the energy industry incliding coal, oil, natural gas and nuclear energy as well as with renewable resources such as water, eind, solar and alternative fuels.		go
	Pax Diagnostics is now a part of Megger group and will work closely the transformer testing group in Valley Forge, USA, but we will continue to work out of Taby, Sweden, sharing the same premises as Programma Electric. We are excited about this merger and we strongly believe that putting the Megger brand name behind our outstanding products will help us to increase the market share for our SFRA and DFR/FDS products worldwide. For more information, read the official		go
	GE has united the technological innovation and experience of industry leaders in the design and manufacture of advanced sensing and measurement solutions into one world-class business – GE Sensing. This new multi-million dollar business, with operations around the world, offers a broad range of products and services that help customers solve challenges and drive productivity. GE Sensing is a global business that provides sensing elements, devices, instruments, and systems that enable our customers to monitor, protect, control, and validate their critical processes and applications. It is a core technology instruments business, focused on high growth industries.		go
	The origins of Tornos go back to the year 1880, which saw the production of the first machines used to turn small parts for the horological industry in the Moutier region. In the 60s and 70s, three local companies - Tornos, Bechler and Petermann - merged to form one single group called Tornos-Bechler, whose reputation in world markets soon rose over the years. Since the 90s, Tornos is looking towards the future and is now one of the leading companies in the small parts turning industry. With its DECO 2000 concept, the company now provides the market with radically new solutions and unrivalled performance. Tornos achieves roughly 90% of its turnover by exporting to countries in Europe outside of Switzerland, the United States and Asia.		go
	ABENE was founded in 1938 under the name AB E.N. Eklunds Mekaniska Verkstad. The founder and owner was Mr Elias Napoleon Eklund. The complete company facilities was located in Stockholm. All ready in 1942 the serial production of ABENE Milling Machines started, and during the first year 54 units was produced. Until today more than 7 000 ABENE Milling Machines has been delivered from Sweden throughout the whole world. The machines were sold under the brand name ABENE, and soon the company name was changed accordingly. Today the SMG-Group employ approx. 300 people. ABENE is merchandised in about 30 countries all over the world through dealers. Further in about 15 countries direct from Valdemarsvik Sweden.		go
	Die Firma GDW Werkzeugmaschinen Herzogenaurach GmbH wurde 1994 von Herrn Hermann Weiler gegründet. Unter seiner Leitung wurde ein komplett neues Drehmaschinenprogramm entwickelt und produziert. Das Lieferprogramm umfasst heute sowohl high-tech-Maschinen für hochkomplexe Aufgaben, sowie Handhebel und Leit- und Zugspindeldrehmaschinen. Mit der TDF- Tangentialdrehfräsmaschine bietet GDW eine high-tech-Innovation für die Komplettbearbeitung langer und schlanker Teile aus hochfesten und gehärteten Werkstoffen an.		go
	From the first moment on, ZIERSCH GmbH is there for companies who are looking for high-quality grinding machines and excellent customer service at a cost-effective price. First and foremost, we are focused on providing short delivery times and an exceptionally good price / performance ratio.. We are focused on you. This means that we are constantly improving the quality and image of our products, as well as our services and organisational structure, in order to meet and even exceed your expectations. The ability to anticipate and fulfil the desires and requirements of our customers is a fundamental prerequisite for the development of our company.		go
	TALMEC was founded in 1977 to manufacture a best quality product by means of Hight-tech machines, combining a low price and the best quality. Nowadays TALMEC can solve any problems concerining the gripping of a workpiece. Its technical office its workshop can develop and manufacture in short times special Equipments for all tool machines (lathes, milling machines, horizontal and vertcal machining centers) which guarantee a safe gripping, the best quality machining with shorter machining with shorter machining times.		go
	Located in the high tech region of Northern Italy (home of Ferrari, Lamborghini, Maserati, De Tomaso), the Company, today named PROMAU (initial in Italian of “Production of Machine Tools”) was founded by the Davi family in 1966. Members of the Davi family continue to manage the operations of the company. World headquarters at Cesena are responsible for: Administration, Sales and Marketing, Research & Development, Developing New Powerful Machine Software, Mechanical Design, Automation Design, Machine Assembly and Testing, Quality Control, After Sale Service.		go
	International Metrology Systems Ltd (IMS) was established in 1992, following the acquisition of the former Ferranti Metrology group, which invented the Co-ordinate Measuring Machine (CMM) technology in 1959 and had over 6,000 installations worldwide. This year, IMS celebrates the 50th Anniversary of the first CMM produced by Ferranti and throughout 2009; IMS will continue its awe inspiring developments.		go
	INNOTOOL, which stands for „Innovative Tooling“, is a market leader in indexable milling products. The high shear geometry design of cutter body and inserts ensures that Innotool performs very well on low powered machines and often the cutting data can be increased considerably due to the soft cutting action		go
	EVPU Defence Ltd. was founded in 2001, the Company is a member of the Association of Defence Industry of the Czech Republic, and has boot Quality System according to ISO 9001/2000 standards. The main activities of the Company could be divided into the two basic spheres. EVPU Defence is open to any cooperation on projects of businesses and production character in the Czech Republic and abroad, in which it is able to apply supplies of devices and services or it's own special skills.		go
	Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation amongst its customers. Indeed, as our customers would expect, Bruker as one of the world's leading analytical instrumentation companies, continues to develop state - of - the- art technologies and innovative solutions for today's analytical questions. The Bruker Group is a leading provider of high-performance scientific instruments and solutions for molecular and materials research, as well as for industrial and applied analysis. Bruker Corporation (NASDAQ: BRKR), headquartered in Billerica, Massachusetts, is the publicly traded parent company of Bruker Scientific Instruments (Bruker AXS, Bruker BioSpin, Bruker Daltonics and Bruker Optics) and Bruker Energy & Supercon Technologies (BEST) divisions.		go
	Spinner Precision Machine-Tools are working successfully world wide at many well known clients in more than 40 countries on 6 continents. We have been fortunate enough to attract small component suppliers as well as world wide known groups in all metal machining industries. We have designed and produced the most modern machine tools since 1950. More than 10.000 delivered machines demonstrate their high efficiency, precision and reliability, everyday.		go